Hertz Cento PRO CPK 165 - 6.5” 16.5cm 315 Watt 2 Way Component Speakers with Tweeters
Kenwood DMX7520DABS 7" Screen Double DIN DAB Radio Bluetooth Android Auto Apple CarPlay
Hertz Cento PRO CPK 690 - 6"x9" 360 Watt 2 Way Component Speakers with Tweeters
The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.
Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.
All electroacoustic parameters have been optimised to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.
The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz.
The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and
12 dB/oct. on the tweeter with three levels of attenuation.
CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel.
Specification
Power Handling - Peak W 360
Power Handling - Continuous W 120
Impedance Ω 4
Frequency response Hz 35 ÷ 22,5k
Sensitivity dB SPL 92
Voice coil Ø mm (in.) 30,5 (1.2)
Woofer size mm (in.) 6 x 9
Tweeter size mm (in.) 29 (1.14)
Woofer magnet Ferrite
Tweeter magnet Neodymium
Woofer cone Pressed Paper
Tweeter dome Tetolon
Crossover type 2 Way
Crossover cut off LP 6 dB / Oct. - HP 12 dB / Oct.
Tweeters
Soft Tetolon® fibre 29 mm (1.14 in.) dome and 25 mm (1 in.) voice coil cooled with ferrofluid, for a natural and yet detailed reproduction of musical nuances.
“Centre Tuning Duct” geometry, for a lower resonance frequency and reduced harmonic distortion.
Neodymium magnet with high-density magnetic flux, optimised for maximum control during high-energy dynamic transients in the mid-high frequency range.
Rear chamber filled with damping material selected and sized for low resonance, ensuring a natural medium range and low crossover frequency with the woofer.
Faceplate geometry optimised with FEM (Finite Element Modelling) technique for a linear frequency response in off-axis installations.
Wide range of accessories, for easy integration in OEM placements.
Woofer
Pressed-paper cone with FEM-optimised geometry, it combines rigidity and lightness for a colour-free sound.
30 mm (1.2 in.) double layer voice coil sized to maximise high excursion and power handling.
High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
Compact and transparent three-spoke basket, acoustically combined with a rubber magnet cover for total damping of spurious vibrations.
Crossovers
Tweeter level adjustable via a three-position switch (-2, 0, +2 dB) for an optimal tonal balance that can be customised by the user
Crossover frequency at 3.1 kHz, with a 12 dB/Oct. and 6dB slope for the woofer, which enhances the reconstruction of the virtual stage in the car compartment.
160 V metallic finish capacitors with high quality polyester film featuring an ultra low DF value and low resistance pure copper inductances, for maximum sound transparency and clear high frequencies.
Compact design with metallic finish to the benefit of the ease of installation, with air vents for efficient heat dissipation.